Resources
RMC100 Communication Options Heading

RMC100 Communication Options

RMC100 Fieldbus Communication Options

The RMC100 controller can be configured with one of five different communication modules supporting more than 25 protocols. The fieldbus-based communication modules are not just for motion data acquisition—they support full motion control via the host system.

RMC100 motion controllers also have an RS232 serial port for use with Delta’s RMCWin setup, tuning and diagnostics package.

The RMC150 controller has built-in Ethernet on the RMC150E CPU and can be configured with a DI/O module in the leftmost slot.

RMC150 controllers have a USB port for use with Delta’s RMCTools software.

Communication Modules

Module RMC100   RMC150   Protocols and Modes Performance
-ENET
*
Ethernet
EtherNet/IP, CSP, Modbus/TCP, CAMP, ISO-on-TPC, FINS, HEI
10Mb, non-deterministic, high data transfer. Update times vary.
-PROFI
PROFIBUS DP
Message Mode or Compact Modes
9.6kb to 12Mb, deterministic, high data transfer with Message mode.
-MB+
Modbus Plus
with or without Global Data
1Mb, deterministic. Flexibility allows high data transfer.
-SERIAL
Serial RS-232, RS-422 or RS-485
A-B DF1, Modbus/RTU, Mitsubishi No Protocol Mode. Consult Delta for others.
9.6kb to 115.2kb data transfer. Update times vary.
-DI/O
Discrete I/O
Command Mode, Input to Event, Parallel Event, Parallel Position
Low data transfer. Events can be triggered quickly.

* The RMC150E CPU has 10/100 Ethernet bulit into the CPU module.

LCD Display and Keypad (RMC100 only)

For applications that require operator data entry and machine status display, the LCD420 for the RMC100/101 CPU is an easy-to-use option, ideal for simple operator panels. See the LCD420 for details.

RMC100 and RMC150 Communications Compatibility with Common Host Systems

Host System Module Compatability
A-B CompactLogix -ENET, RMC150E: A-B# 1761-NET-ENI
-PROFI: N/A
-MB+: N/A
-SERIAL: A-B DF1
A-B ControlLogix -ENET, RMC150E: A-B# 1756-ENBT
-PROFI: SST# SST-PFB_CLX
-MB+: N/A
-SERIAL: A-B DF1
A-B MicroLogix -ENET, RMC150E: A-B# 1761-NET-ENI
-PROFI: N/A
-MB+: N/A
-SERIAL: A-B DF1 (1500 LRP Recommended)
A-B PLC-2, PLC-3 -ENET, RMC150E: N/A
-PROFI: N/A
-MB+: ProSoft# 3300-MBP
-SERIAL: A-B DF1
A-B PLC5/x0 -ENET: Built-in with SLC 5/05. Others use A-B#1761-NET-ENI
RMC150E: Use A-B# 1785-ENET
-PROFI: SST# SST-PFB-PLC5
-MB+: ProSoft# 3300-MBP
-SERIAL: A-B DF1
A-B SLC500 -ENET, RMC150E: Built-in with SLC 5/05. Others use A-B# 1761-NET-ENI
-PROFI: (SLC 5/03 or lateR) SST# SST-PFB-SLC
-MB+: (SLC 5/02 or later) ProSoft# 3350-MBP
-SERIAL: A-B DF1
A-B SoftLogix 5800 -ENET, RMC150E: Any Windows Computer with Ethernet Card
-PROFI: N/A
-MB+: N/A
-SERIAL: A-B DF1
A-B SoftLogix 5800 -ENET, RMC150E: Any Windows Computer with Ethernet Card
-PROFI: SST# 5136-PFB-PCI or 5136-PFB-ISA
-MB+: N/A
-SERIAL: N/A
DirectLogic DL05/06 -ENET: Automation Direct# H0-COM
RMC150E: Automation Direct# H0-ECOM
-PROFI: N/A
-MB+: N/A
-SERIAL: Automation Direct# D0-DCM via Modbus/RTU
DirectLogic DL205/405 -ENET: Automation Direct# H2-COM, H4-COM
RMC150E: Automation Direct# H2-ECOM, H4-ECOM
-PROFI: N/A
-MB+: N/A
-SERIAL: DL250 and 260 CPUs support Modbus/RTU
GE Fanuc Series 90-30 -ENET, RMC150E: Ethernet available on new models
-PROFI: Horner Electric# HE693PBM101
-MB+: N/A
-SERIAL: RS-232 – Call Delta for info
GE Fanuc RX3i -ENET, RMC150E: #IC695ETM001
-PROFI: N/A
-MB+: N/A
-SERIAL: N/A
GE Fanuc Series 90-70 -ENET, RMC150E: N/A
-PROFI: SST# SST-PFB-GE
-MB+: N/A
-SERIAL: N/A
Mitsubishi FX2N -ENET, RMC150E: N/A
-PROFI: N/A
-MB+: N/A
-SERIAL: Use No Protocol Mode
Mitsubishi Q-series -ENET: N/A
RMC150E:
Mitsubishi # QJ71MT91, QJ71E71-100
-PROFI: N/A
-MB+: N/A
-SERIAL: Use No Protocol Mode
Modicon 800 Series (*1), other -ENET, RMC150E: N/A
-PROFI: N/A
-MB+: Many options available from Schneider Electric
-SERIAL: Modicon Modbus/RTU
Modicon Premium -ENET, RMC150E: Modicon# TSXETY110
-PROFI: Modicon# TXSPBY100
-MB+: Many options available from Schneider Electric
-SERIAL: Modicon Modbus/RTU
Modicon TSX Momentum -ENET, RMC150E: N/A
-PROFI: Modicon# 170 DNT 110 00
-MB+: Many options available from Schneider Electric
-SERIAL: Modicon Modbus/RTU
Modicon TSX Quantom (*2) -ENET, RMC150E: Modicon# 140 NOE 211 00
-PROFI: Modicon# 140 GRP 811 00
-MB+: Many options available from Schneider Electric
-SERIAL: Modicon Modbus/RTU
Omron C200 -ENET, RMC150E: N/A
-PROFI: N/A
-MB+: N/A
-SERIAL: RS-422/485 – Call Delta for info
Omron CJ1, CJ1M and CS1 -ENET, RMC150E: Omron# CS1W
-PROFI: N/A
-MB+: N/A
-SERIAL: N/A
Omron CV -ENET: Omron# CSV500-ETN01
RMC150E: N/A
-PROFI: N/A
-MB+: N/A
-SERIAL: N/A
PC (All Varieties) -ENET, RMC150E: PC-based SCADA or control software that can communicate over Ethernet to any of the controllers in this chart may support the -ENET module.

The RMCLink ActiveX Control and .NET Assembly can be used for communication via Ethernet from numerous programming languages on a PC.
-PROFI: See ISA, PCI, 3U Compact PCI, PC/104, or PCMCIA
-MB+: See ISA, PCI, 3U Compact PCI, PC/104, or PCMCIA
-SERIAL: PC-based software that supports DF1 or Modbus/RTU

The RMCLink ActiveX Control and .NET Assembly can be used for communication via serial RS-232 from numerous programming languages on a PC.
PC (ISA) -ENET, RMC150E: See PC (All Varieties)
-PROFI: SST# 5136-PFB-ISA or 5136–PBMS-ISA Lan# SMS-CIF30-PB or SMS-CIF30-DPM
-MB+: Schneider Electric# SA85 Lan# SMS-CIF30-MBP
-SERIAL: See PC (All Varieties)
PC (PCI) -ENET, RMC150E: See PC (All Varieties)
-PROFI: SST# 5136-PFB-PCI Lan# SMS-CIF50-PB App# Several versions
-MB+: App# PCI2000MBP
-SERIAL: See PC (All Varieties)
PC (3U CompactPCI) -ENET, RMC150E: See PC (All Varieties)
-PROFI: App# CPCI1000PFB or CPCI-DPIO
-MB+: N/A
-SERIAL: See PC (All Varieties)
PC (PC/104) -ENET, RMC150E: See PC (All Varieties)
-PROFI: SST# 5136-PFB-104 Lan# SMS-CIF104-PB or SMS-CIF104-DPM App# PCI104PFB or PC104-DPI
-MB+: Lan# SMS-CIF104-MBP
-SERIAL: See PC (All Varieties)
PC (PCMCIA) -ENET, RMC150E: N/A
-PROFI: SST# 5136-PFB-PCM Lan# SMS-CIF60-PB
-MB+: N/A
-SERIAL: N/A
Reliance AutoMax -ENET: N/A
RMC150E: N/A
-PROFI: SST# SST-PFB-REL
-MB+: N/A
-SERIAL: N/A
Siemens Simatic 505 (*3), S5 -ENET: (505) CTI# CTI 2572
RMC150E: N/A
-PROFI: Many options available from Siemens
-MB+: N/A
-SERIAL: N/A
Siemens Simatic S7-300, S7-400 -ENET: Siemens# Cp343/443-1
RMC150E: N/A
-PROFI: Many options available from Siemens
-MB+: N/A
-SERIAL: N/A
SoftPLC -ENET, RMC150E: PC-based – Ethernet support standard
-PROFI: N/A
-MB+: N/A
-SERIAL: N/A

This is only a partial list. The RMC100 motion controllers can communicate with the above PLCs or any other PLC using the DI/O module. The RMC100 can also communicate directly to many HMIs via Ethernet, A-B DF1, or Modbus RTU or other protocols.

This list is provided for the convenience of our customers. Delta shall have no liability whatsoever for the use of this information, the accuracy or completeness of list or of the availability or suitability of any products referenced.

All registered or trademarked names are the property of their respective companies.

A-B: Allen-Bradley (www.ab.com)
App: Applicom (www.applicom-int.com)
Automation Direct (www.automationdirect.com)
CTI: Control Technology, Inc. (www.controltechnology.com)
GE Fanuc (www.geindustrial.com, www.gefanuc.com)
Hilscher (www.hilscher.com) available through Lantronix
Horner Electric APG (www.heapg.com)
Lan: Lantronix (formerly Synergetic Micro Systems, Inc.) (www.synergetic.com)
Mitsubishi (www.mitsubishielectric.com)
Modicon or Schnieder Electric: (www.modicon.com)
Omron (oeiweb.omron.com)
Reliance (www.reliance.com)
ProSoft Technology, Inc. (www.psft.com)
Siemens (www.sea.siemens.com) or (www.aut.sea.siemens.com)
SoftPLC Corp )www.softplc.com)
SST: (www.mysst.com)