Online RMC70

Connecting to a Live RMC70 with RMCTools

Connect using a Sample Project

Use RMCTools to connect to a live RMC70. This method uses a sample project that is already set up with proper internal simulator and tuning values for each axis and has a few user programs. It will connect to rmc70.deltamotion.com.

Download and install RMCTools.
Download and unzip this RMC70 sample project: online_rmc70.zip. Unzip the file to an easy-to-remember location, such as the Desktop.
Open RMCTools.
In the Startup dialog, choose Browse for an Existing Project and click Browse.
Browse to the Delta Online RMC70.rmcproj that you just unzipped and click Open, then OK.
In the Project pane, right-click the RMC70 and choose Go Online. If any Conflict dialogs appear, click Download if it is available, otherwise, click Upload. If prompted, choose Save all Settings to Flash.
If RMCTools cannot connect, try connecting a few more times. If it still fails, check your internet connection settings, including the firewall.

Connect without a Sample Project

Use RMCTools to connect to a live RMC70:

Download and install RMCTools.
Open RMCTools.
In the Startup dialog, choose Create a New Project and click OK.
Enter your project name and path and click Finish.
In the New controller WIzard, choose Automatically Detect the Controller Information and click Next.
Choose Ethernet and click Next.
In the IP Address box, type the hostname or IP address of the RMC70 you wish to connect to and click Next. See Online RMCs for a list of available RMCs.
If RMCTools successfully connects, it will show an image of the controller. Click Finish. If RMCTools cannot connect, try a few more times. If it still fails check your internet and firewall settings.
In the Project pane, right-click the RMC70 and choose Go Online. If any Conflict dialogs appear, click Upload.
In the Project pane, right-click the RMC70 and choose Upload All. Your project now shows what is in the RMC70.