Online RMC100

Connect to a Live RMC100 with RMCWin

Connect using a Sample Project

Use RMCWin to connect to a live RMC100. This method uses a sample project that is already set up with proper tuning values for axis 0. It will connect to 64.122.46.183.

Download and install RMCWin.
Download and unzip this RMC100 sample project: online_rmc100.zip. Unzip the file to an easy-to-remember location, such as the Desktop.
Open RMCWin.
On the File menu, choose Open.
Browse to the Delta Online RMC100.bd1 that you just unzipped and click Open.
RMCWin will try to connect to the RMC. If it still fails, check your internet connection settings, including the firewall.
Click anywhere in the Axis0 column to set the cursor in the column, then click the "P" button on the toolbar. This will send the Axis0 parameters to the RMC.
Repeat the previous step for the Aux2 axis column.

Connect without a Sample Project

Use RMCWin to connect to a live RMC100:

Download and install RMCWin.
Open RMCWin.
On the Tools menu, choose Options.
Choose TCP/IP Direct to RMC-ENET.
In the Target IP Address box, type the IP address of the RMC100 you wish to connect to and click OK. See Online RMCs for a list of available RMCs.
If RMCWin successfully connects to the RMC100, the RMCWin bottom status bar will say online. If RMCWin cannot connect, check your internet connection settings, including the firewall.