RMCLink Release Notes

This file contains the differences between versions of RMCLink back to its original release.

RMCLink 3.1a (3.01.01) (December 5, 2011)

  1. Improved samples for Excel with VBA, including fixing a bug in the RMC150 sample.

RMCLink 3.1 (3.01.00) (September 21, 2011)

  1. Added support for using RMCLink from 64-bit applications.
  2. Added support for new error code when using the Image Upload/Download Area.
  3. The RMCLink installer will now open the RMCLink documentation by default.

RMCLink 3.0a (3.00.01) (January 29, 2010)

  1. Improved samples for Excel with VBA.

RMCLink 3.0 (3.00.00) (July 8, 2009)

  1. Added support for communicating with RMC75E and RMC150E controllers over USB.
  2. Added new methods for reading and writing to the Image Area on RMC75E and RMC150E controllers.
  3. Updated the LabVIEW 8.5 instrument driver for use with the RMC70/150. The new instrument driver is certified by LabVIEW.

RMCLink 2.0e (2.00.08) (April 15, 2009)

  1. Fixed a problem in which the Scale and Offset parameters used by RMCLink on the RMC100 to properly convert 16-bit positions to 32-bit positions were not updated when the Scale and Offset values were written to.

RMCLink 2.0d (2.00.07) (November 3, 2008)

  1. Additional functionality for internal Delta use.

RMCLink 2.0c (2.00.06) (September 23, 2008)

  1. Updated the CRMCLink C++ wrapper class to support Borland C++ Builder.

RMCLink 2.0b (2.00.05) (May 15, 2008)

  1. Fixed a problem in which writing to the Plot Time registers on the RMC100 did not work properly.
  2. Fixed a problem in which serial ports numbered above COM9 were not supported.

RMCLink 2.0a (2.00.04) (May 9, 2008)

  1. Added Virtual Instrument (VI) drivers for National Instruments LabVIEW 8.5.

RMCLink 2.0 (2.00.02) (June 20, 2007)

  1. Fixed a problem in which the RMCLink installer did not work on Windows 2000, 98, Me, and NT4.

RMCLink 2.0 (2.00.01) (April 24, 2007)

  1. Digitally signed installer and components for improved installation experience on Windows Vista.

RMCLink 2.0 (2.00.00) (April 19, 2007)

  1. Added support for communicating with the RMC150.
  2. Added Virtual Instrument (VI) drivers for National Instruments LabVIEW 7.1.
  3. Added samples for various programming languages to the installer.

RMCLink 1.1 (March 3, 2006)

  1. Added support for specifying a TCP port number when establishing a connection over Ethernet.

RMCLink 1.0 (January 13, 2006)

Initial RMCLink release, supporting the RMC70 and RMC100.